Please see SMF1.1:Membergroups or SMF2.0:Membergroups depending on the version of SMF you are using.
A membergroup's permissions are determined by the administrator. An administrator can, for example, set which boards members from a certain membergroup can see, and whether those members are allowed to manage members. To assign membergroups, the administrator should go into the user's profile, into Account Related Settings, and they may set that user to a membergroup by selecting one from the drop-down list called Primary Membergroup.
Please be aware that SMF requires that you have at least one post count based membergroup. You can negate this, for the most part, by removing all of the post count based membergroups except for that one, required group. That one, remaining, membergroup can be given any name. Just ensure that the number of required posts, for that group, is 0 (zero).
As with all other group permissions, should a user belong to both a standard (non post count based) group and a post count based group, that user will have all of the permissions granted in either group. The best way to avoid confusion in this case is to set all permissions for post count based group(s) to "Disallow" (X). Once that is done, only the permissions given by the user's standard (non post count based) groups, which are set to "Allow" (A), will be used.
Edit Membergroups
On the Edit Membergroups tab, there are two separate tables. The table at the top lists the regular membergroups on your forum (the non post count based groups). The bottom table lists all of the post count based groups.
The membergroup names are coloured differently depending on which colour is assigned to the group. Next to each of the group names are the star images used for the group, the number of members the group currently has, and a link to modify the group. On post count based groups you will also see the required posts needed for a member to be in that post count based group.
Membergroup Management
- Add a new membergroup
- Edit an existing membergroup
- Select the membergroups that can modify membergroups
The add membergroup page is almost the same as the edit membergroup page, so both are combined into one document, and both links above go to the same document.
Add Membergroup
On this page you will be able to create new membergroups with the desired permissions. This page can be accessed by selecting the Add Membergroup tab when viewing the membergroups section of the Administration center
Settings
On this page you can select which membergroups are allowed to modify membergroups by checking the boxes for each.
Membergroup Management
- Add a new membergroup
- Edit an existing membergroup
- Select the membergroups that can modify membergroups
The add membergroup page is almost the same as the edit membergroup page, so both are combined into one document, and both links above go to the same document.
Membergroup name - The name you want to call the group. This name will be publicly shown next to the member's details on each post and will help you know which group is which.
- This group is based off posts - Check this to make the group a post-count based group.
- Required Posts - When making the membergroup based on the number of posts, you are required to choose the number of posts required for a member to be in that group. This can be any number you like. Note, keep track of any existing membergroups that are based on post count. While you can have multiple membergroups require the same number of posts to be a part of the group, the newer group will be the only one members will actually be put in when they have the specified posts.
Permissions - When creating a membergroup, you must select the initial permission settings the membergroup will use. Please note on group creation you are limited in what permissions you can give the group and that this section only appears when creating a new group, but you can always go to Permissions to adjust the permissions for the membergroup.
There are a few types of settings you can use for permissions.
- by type - There are four basic types of membergroups: Restrictive, Standard, Moderator, and Maintenance.
- Restrictive - This is the permission settings that guests get by default.
- Standard - This is the permission setting that a standard registered user would receive by default.
- Moderator - Any group with this permission setting would be able to moderate boards that they can see.
- Maintenance - This is the permission settings that is very similar to that of the administrator.
- based off of - You can choose the permissions of another membergroup to base this new one on. This will copy the permissions for the other group, you just choose the group, then alter permissions accordingly.
Visible Boards - This allows you to choose which boards this new group will have access to. You may change these at any time by going to membergroups / edit membergroups and clicking the link [ Show boards ] at the bottom next to Visible Boards.
Color in online list - Select the HEX colour value to represent the group. This colour will come into effect when viewing the overall online list or a list of members viewing a topic or board. The member's username link will appear in this color. This can be useful in denoting that a member is in a special group. Note, this only comes into effect for primary membergroups. Members who have a group as a secondary group will not appear in this color at any point. This field is only shown when modifying an existing membergroup.
Number of star images - Membergroups can have small images to appear below the group next to posts made by members of the group. Here you can configure how many of these images you want to show for the group. This option is only shown when modifying an existing group
Star image filename - Here you can select the filename of where the image you want to use should be taken from. Like the option above it, this option is only shown when modifying an existing group. As indicated next to this field, the image to be called should be uploaded to {theme URL}/images/. So each theme of yours should have an image with the specified filename available.
Max personal messages - Here you can set the maximum number of personal messages that a user can have stored in their inbox. "0" means no limit.
Main
Configuration
Forum
Members
Maintenance
Miscellaneous
- Security Tips
- Building Your Community
- Performance enhancements
- Modifications - A mod broke my forum what should I do
