What the white screen of death means: Difference between revisions From Online Manual

Jump to: navigation, search
No edit summary
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{TOC right}}
{{TOC right}}
==Explanation of the Causes of the White Screen==
==What is the White Screen of Death==
A white screen when opening a page in SMF (or in any other PHP-based application) means that an irrecoverable error occurred, which caused the execution of the script to be halted before any content is outputted to your browser.


The issue appears to be that when a page is loaded, and the script tries to load one (or more) additional files to perform sub-tasks, the system runs out of allocated memory.
There are ''mainly'' two reasons for this to happen.  The first is that there is a PHP error in the code of your forum (which you might get if you are performing changes in the code or installing a MOD).  The second is that PHP cannot use the necessary memory for the task being requested.


The reason this is happening is because those of you encountering this issue are very likely running your site on an overselling host.  This means that the host you chose sells sites with "unlimited" stuff, such as bandwidth, or disk space.  The truth is that nobody could actually afford to sell "unlimited" everything (or anything).  Hosts need to pay for expenses and make money.  The host that you chose may ''advertise'' "unlimited", but in reality, they have severely limited your account, because they put far too many "unlimited" accounts on the same physical, or virtual, machine. They then apply "hidden" limits, and shut your forum down, when your usage exceeds these limits.  Even though you are, therefore, meant to have been offered an "unlimited" service, you have not.
===Why Do I See a White Page and Not the Error Itself?===
Your PHP configuration may prevent this error from being displayed. On a live and fully functional web site your guests are not supposed to see errors (if they occur), because they might reveal file paths or other sensitive information. For this reason, some hosts specifically configure PHP to not show errors.


It is important to realize that there is a limit to how much memory a given script can access, and that every host has a limit like this.  A ''real'' host, however, has a reasonable amount, and will not put far too many accounts on a single server such that they overuse the available resources, and a ''real'' host will discuss how much you require if you truly need to exceed that amount.
==How to Get More Information==
There are several ways to obtain more information. Some of these are listed below, but please be aware that they might not exist in your specific server configuration.


In your case, the host has set this limit low.  So low, in fact, that the package manager cannot load Subs-Post.php to process the BBC tags in the readme file of the mod.  If that inclusion is bypassed, the script next chokes on the loading of Subs-Package.php, which cannot be bypassed because that file contains the instructions needed to process the Mod package.
===Contact your Host===
Assuming you do not run your own server, contacting your host is the easiest way to obtain information. Your host should have access to all your logs, so they should be able to provide you with detailed information.


==How to Solve the Problem==
===Check your Logs===
 
When a PHP error occurs, it is logged in a file in your server's hard drive. Depending on your configuration, you should also have that file in your home directory. Use your FTP client and search for a file which is usually called "error_log", "error.log", or variations of this.  If you do not find such file, that is because your server is not configured to create it. Contact your host and ask them to enable this option, as it is a very helpful debug tool.
You now have three choices:
 
# Ask your host to increase your available memory.
# Switch to a non-overselling host. There are a large number of those hosts listed in our [http://www.simplemachines.org/community/index.php?board=4.0/ Hosts and Hosting] boards. These hosts may be slightly more expensive than the one that you originally chose, but, as is often the case, you do get what you pay for.
# See below for options that you ''can'' try (none are guaranteed to work) if you want to stay on your current host.
 
===Increase Memory Allocation Externally===
 
You can try and use a ''.htaccess'' file to overwrite the memory limit, but if the server controls it (which is probably the case, since SMF tries to set it high enough using ''ini_set'' when installing a mod package), then it probably will not work, and you are stuck with the server PHP memory limit.
 
Using  ''phpinfo()'' should also tell you if PHP runs in CGI mode or as an Apache module (''mod_php''). If it runs in CGI mode, htaccess will not work. If PHP runs as an Apache module, use htaccess to set the PHP memory limit:


*Creating a [[Phpinfo() - What's that, then|''phpinfo.php'' file]], will tell you your PHP memory limit.
===Try to Output More Information===
{{code|1=<nowiki><?php phpinfo(); ?></nowiki>}}
It is possible to tell PHP to output the error information directly to your browser. To do so, edit SMF's index.php (make sure that you create a backup first) with your favourite text editor and find:
 
*In ''.htaccess'', you can try to add the following:
{{code|1=<nowiki>php_value memory_limit 64M</nowiki>}}
 
*If you add this and get a 500 Internal Server Error, then your host is running PHP in CGI Mode, and you will have to increase the memory_limit in the ''php.ini'' file.
{{code|1=<nowiki>memory_limit = 64M</nowiki>}}
If you are not allowed to have a custom ''php.ini'' file, you will have to ask your host to do this.
 
===Increase Memory Allocation in the File(s)===
 
You can try to increase the memory allocation in the files and functions directly.
 
*In ''/Sources/Class-Package.php'', find:
{{code|1=<nowiki>
{{code|1=<nowiki>
// If we're using this try to get some more memory.
// Get everything started up...
@ini_set('memory_limit', '32M');
define('SMF', 1);
</nowiki>}}
</nowiki>}}
*Replace with
 
Replace with:
{{code|1=<nowiki>
{{code|1=<nowiki>
// If we're using this try to get some more memory.
error_reporting(E_ALL);
@ini_set('memory_limit', '128M');
ini_set('display_errors', 1);
 
// Get everything started up...
define('SMF', 1);
</nowiki>}}
</nowiki>}}
After you fix the underlying problem you should revert this change.


*in ''/Sources/Admin.php'', find
==How to Solve the Problem==
{{code|1=<nowiki>
How to solve the problem depends specifically on what the problem is. The most common causes are:
// Get one of the admin information files from Simple Machines.
 
function DisplayAdminFile()
===PHP Code Errors===
{
You should only see these errors when you are editing your forum's code or when installing/uninstalling MODs. Your log should display something like (these are just examples):
global $context, $modSettings, $smcFunc;
{{code|1=<nowiki>Parse error: syntax error, unexpected $end in /home/user/public_html/forum/index.php on line 175</nowiki>}}
{{code|1=<nowiki>Fatal error: Call to undefined function getInitialInformation() in /home/user/public_html/forum/index.php on line 175</nowiki>}}
''(error, file name, file path and and line number might of course vary)''


@ini_set('memory_limit', '32M');
===PHP Memory Errors===
</nowiki>}}
This error occurs when the code execution tries to allocate more memory than the system is configured to grant. Your log should tell you something like:
*Replace with
{{code|1=<nowiki>Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 826064718 bytes) in /home/user/public_html/forum/index.php on line 175</nowiki>}}
{{code|1=<nowiki>
''(memory quantities, file name, file path and and line number might of course vary)''
// Get one of the admin information files from Simple Machines.
function DisplayAdminFile()
{
global $context, $modSettings, $smcFunc;


@ini_set('memory_limit', '128M');
==Ask us for Support==
</nowiki>}}
Please ask us for support by posting in [http://www.simplemachines.org/community/index.php#c3 the appropriate support board] for the version of SMF your forum uses. Please make sure you provide us with your [http://wiki.simplemachines.org/smf/What_is_a_phpinfo%28%29_file phpinfo] alongside your request.


[[Category:FAQ]]
[[Category:FAQ]]

Latest revision as of 12:28, 17 June 2016

What is the White Screen of Death

A white screen when opening a page in SMF (or in any other PHP-based application) means that an irrecoverable error occurred, which caused the execution of the script to be halted before any content is outputted to your browser.

There are mainly two reasons for this to happen. The first is that there is a PHP error in the code of your forum (which you might get if you are performing changes in the code or installing a MOD). The second is that PHP cannot use the necessary memory for the task being requested.

Why Do I See a White Page and Not the Error Itself?

Your PHP configuration may prevent this error from being displayed. On a live and fully functional web site your guests are not supposed to see errors (if they occur), because they might reveal file paths or other sensitive information. For this reason, some hosts specifically configure PHP to not show errors.

How to Get More Information

There are several ways to obtain more information. Some of these are listed below, but please be aware that they might not exist in your specific server configuration.

Contact your Host

Assuming you do not run your own server, contacting your host is the easiest way to obtain information. Your host should have access to all your logs, so they should be able to provide you with detailed information.

Check your Logs

When a PHP error occurs, it is logged in a file in your server's hard drive. Depending on your configuration, you should also have that file in your home directory. Use your FTP client and search for a file which is usually called "error_log", "error.log", or variations of this. If you do not find such file, that is because your server is not configured to create it. Contact your host and ask them to enable this option, as it is a very helpful debug tool.

Try to Output More Information

It is possible to tell PHP to output the error information directly to your browser. To do so, edit SMF's index.php (make sure that you create a backup first) with your favourite text editor and find: 


// Get everything started up...
define('SMF', 1);

Replace with: 


error_reporting(E_ALL);
ini_set('display_errors', 1);

// Get everything started up...
define('SMF', 1);

After you fix the underlying problem you should revert this change.

How to Solve the Problem

How to solve the problem depends specifically on what the problem is. The most common causes are:

PHP Code Errors

You should only see these errors when you are editing your forum's code or when installing/uninstalling MODs. Your log should display something like (these are just examples): 

Parse error: syntax error, unexpected $end in /home/user/public_html/forum/index.php on line 175

Fatal error: Call to undefined function getInitialInformation() in /home/user/public_html/forum/index.php on line 175

(error, file name, file path and and line number might of course vary)

PHP Memory Errors

This error occurs when the code execution tries to allocate more memory than the system is configured to grant. Your log should tell you something like: 

Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 826064718 bytes) in /home/user/public_html/forum/index.php on line 175

(memory quantities, file name, file path and and line number might of course vary)

Ask us for Support

Please ask us for support by posting in the appropriate support board for the version of SMF your forum uses. Please make sure you provide us with your phpinfo alongside your request.

Retrieved from "https://wiki.simplemachines.org/w/index.php?title=What_the_white_screen_of_death_means&oldid=29801"


Advertisement: