Difference between revisions of "Administration - I accidentally lost my admin account! What can I do" From Online Manual

Jump to: navigation, search
(23 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 
{{DISPLAYTITLE:I accidentally lost my admin account! What can I do?}}
 
{{DISPLAYTITLE:I accidentally lost my admin account! What can I do?}}
{{TOCright}}
+
If you accidentally delete your administrator account, you will need to register again and run the appropriate query for your SMF version in phpMyAdmin.  
If you accidentally delete your administrator account, you will need to register again and run the appropriate query for your SMF version.  
 
  
If you lose your administrator membergroup and privileges due to a mistake or conversion, you will need to run the appropriate query for your SMF version, but you do not have to register your account again.
+
If you lose your administrator membergroup and privileges because of a mistake or conversion, you will need to run the appropriate query for your SMF version. Fortunately, in this case, you do not have to register your account again.
  
== Script for SMF 2.0 -- administrate.php ==
+
{{TOC limit|3}}
Interested parties have created the [http://www.simplemachines.org/community/index.php?topic=425480 administrate.php script] for SMF 2.0 to solve this problem. This script is not officially supported. Please use at your own descretion. Please back up your database before you being.
+
 
 +
==Script for SMF 2.0: administrate.php ==
 +
 
 +
The [http://www.simplemachines.org/community/index.php?topic=425480 administrate.php] script for SMF 2.0 has been created to solve this problem. '''This script is not officially supported, so use it at your own discretion'''. Make sure you [[backup|back up]] your database before you begin.
 +
 
 +
To begin:
 +
# Log in to the forum.
 +
# Upload the file, ''administrate.php'', to your forum directory (where ''SSI.php'' is found).
 +
# Using your browser, visit ''administrate.php''.
 +
 
 +
==Other Approaches==
 +
 
 +
===Setting up a New User Account to be Admin===
 +
 
 +
The queries below will add you back as an administrator on an SMF forum. '''Do not forget to replace smf_ with your database prefix.'''  These queries can be run from within [[phpMyAdmin]], or, if you do not have phpMyAdmin installed, from a simple single-purpose script.
 +
 
 +
For '''SMF 1.1''', run this query:
  
To begin,
 
* log in to the forum.
 
* Upload the file, administrate.php, to your forum directory (where SSI.php is found)
 
* Using your browser, visit administrate.php
 
==Other approaches==
 
===Setting a new user account up to be admin===
 
The below queries will add you back as an administrator on an SMF forum. ''' Don't forget to replace smf_ with your database prefix.'''  These queries can be run from within [[phpMyAdmin]], or, if you do not have phpMyAdmin installed, from a simple single-purpose script.
 
====SMF 1.1====
 
Run this query:
 
 
{{code|1=UPDATE smf_members SET ID_GROUP = '1' WHERE memberName = 'adminsusername'}}
 
{{code|1=UPDATE smf_members SET ID_GROUP = '1' WHERE memberName = 'adminsusername'}}
  
====SMF 2.0====
+
For '''SMF 2.0''', run this query:
Run this query:
+
 
 
{{code|1=UPDATE smf_members SET id_group = '1' WHERE member_name = 'adminsusername'}}
 
{{code|1=UPDATE smf_members SET id_group = '1' WHERE member_name = 'adminsusername'}}
  
In addition, SMF 2.0 allows you to re-attribute posts through the [[Forum Maintenance]] section of your [[Administration Center]] (Administration Center > [[Forum Maintenance]] > ''Reattribute User Posts''). You just need to fill in the form using the e-mail address or username of the old user account, and the username for the user who is to have those posts. This only works for guest posts (remaining posts from deleted members are considered guest posts).
+
In addition, SMF 2.0 allows you to re-attribute posts:  ''Administration Center > [[Forum Maintenance]] > Reattribute User Posts''. You just need to fill in the form using the e-mail address or username of the old user account, and the username for the member who is to have those posts. This only works for guest posts (remaining posts from deleted members are considered guest posts).
 +
 
 +
====Creating a Single-Purpose Script====
 +
 
 +
Follow these instructions:
 +
 
 +
# Create a PHP file called '''createadmin.php'''.
 +
# Copy and paste within this file the code below, according to your SMF version.
 +
# Replace ''adminusername'' with the login name you want to set as admin.
 +
# Using [[FTP_-_How_do_I_use_FTP|FTP]] upload '''createadmin.php'' to your forum directory, which is the same directory that has ''SSI.php'' in it.
 +
# Run the script, accessing it from your browser by URL as<br><nowiki>http://www.yourwebsite.tld/forum/createadmin.php</nowiki>.
 +
# Afterwards, make sure to delete '''createadmin.php''' from your forum's directory.
  
====Creating a single-purpose script====
+
For '''SMF 1.1''':
*Create a php file called '''createadmin.php'''
 
*Copy and paste in it the code below according to your SMF version
 
*Replace in the code ''adminusername'' with the login name you want to set as admin.
 
*Using [[FTP_-_How_do_I_use_FTP|FTP]] upload it to your forum directory -- the same directory that has SSI.php in it.
 
*Run the script, accessing it from your browser by URL as<br><nowiki>http://www.yourwebsite.tld/forum/createadmin.php</nowiki>.
 
*Afterwards, make sure to delete the file from your forum's directory.
 
  
=====SMF 1.1=====
 
 
{{code|1=<nowiki><?php
 
{{code|1=<nowiki><?php
  
Line 41: Line 51:
 
//---------------------------------------------------------------------------
 
//---------------------------------------------------------------------------
  
// You shouldn't need to change anything past this point in the script.
+
// You should not need to change anything past this point in the script.
 
//Here we include SSI for globals used within the sql statement
 
//Here we include SSI for globals used within the sql statement
 
include_once('SSI.php');
 
include_once('SSI.php');
Line 54: Line 64:
 
?></nowiki>}}
 
?></nowiki>}}
  
=====SMF 2.0=====
+
For '''SMF 2.0''':
 +
 
 
{{code|1=<nowiki><?php
 
{{code|1=<nowiki><?php
  
 
// Pick a username to be the new admin user -- use the login name, not the display name
 
// Pick a username to be the new admin user -- use the login name, not the display name
$yourusername='adminusername';
+
$yourusername = 'adminusername';
  
 
//---------------------------------------------------------------------------
 
//---------------------------------------------------------------------------
  
// You shouldn't need to change anything past this point in the script.
+
// You should not need to change anything past this point in the script.
//Here we include SSI for globals used within the sql statement
+
// Here we include SSI for globals used within the sql statement
 
include_once('SSI.php');
 
include_once('SSI.php');
  
// Now run the query to elevate the user to administrator
+
// Now run the query to elevate the user to administrator
$querystring='UPDATE {db_prefix}members
+
// Also make sure that the account is activated!
SET id_group = \'1\' WHERE member_name = \'' . $yourusername . '\'';
+
$smcFunc['db_query']('', '
$adminElevate = $smcFunc['db_query']('', $querystring, array());
+
UPDATE {db_prefix}members
 
+
SET id_group = {int:admingrp},
//Make sure that the account is activated!
+
is_activated = {int:is_activated}
$querystringb='UPDATE {db_prefix}members SET is_activated = 1 WHERE member_name = \'' . $yourusername . '\'';
+
WHERE member_name = {string:name}',
$adminActivate = $smcFunc['db_query']('', $querystringb, array());
+
array(
 +
'admingrp' => 1,
 +
'is_activated' => 1,
 +
'name' => $yourusername,
 +
)
 +
);
  
 
echo $yourusername . ' should now be an admin';
 
echo $yourusername . ' should now be an admin';
 
?></nowiki>}}
 
?></nowiki>}}
  
===But I need admin to activate the new account before I can log in===
+
===I Need Admin to Activate the New Account before I Can Log in===
Solution: turn off account activation altogether.
+
 
In phpMyAdmin, or in a single-purpose script, run the appropriate query for your version of SMF.
+
Solution: turn off account activation altogether. In phpMyAdmin, or in a single-purpose script, run the appropriate query for your version of SMF. Afterwards, be sure to set account activation back the way you want it.
Afterwards, be sure to set account activation back the way you want it.
+
 
====SMF 1.1====
+
For '''SMF 1.1''':
 +
 
 
{{code|1=UPDATE smf_members SET is_activated = 1 WHERE memberName = 'yourusername';}}
 
{{code|1=UPDATE smf_members SET is_activated = 1 WHERE memberName = 'yourusername';}}
====SMF 2.0====
 
  
The smf SSI php script above will automatically activate the account, but if you prefer to use phpmyadmin direct then the following query will activate the user....
+
For '''SMF 2.0''':
 +
 
 +
The [[#Creating_a_Single-Purpose_Script | SSI PHP script]] above will automatically activate the account, but if you prefer to use phpMyAdmin directly then the following query will activate the user:
  
 
{{code|1=UPDATE smf_members SET is_activated = 1 WHERE member_name = 'yourusername';}}
 
{{code|1=UPDATE smf_members SET is_activated = 1 WHERE member_name = 'yourusername';}}
  
===But I forgot my password and I cannot create a new account===
+
===I Forgot My Password and I Cannot Create a New Account===
 +
 
 
In phpMyAdmin, or in a single-purpose script, run this query:
 
In phpMyAdmin, or in a single-purpose script, run this query:
 +
 
{{code|1=UPDATE {$db_prefix}_settings SET value = 0 WHERE variable = 'registration_method';}}
 
{{code|1=UPDATE {$db_prefix}_settings SET value = 0 WHERE variable = 'registration_method';}}
 
Afterwards, be sure to set the registration method the way you want it.
 
Afterwards, be sure to set the registration method the way you want it.
  
===I need to create a new account for admin, but my forum is in maintenance mode===
+
===I Need to Create a New Account for Admin, but My Forum is in Maintenance Mode===
{{For more information|about=setting the value of $maintenance in your Settings.php file|Settings.php#.24maintenance{{!}}$maintenance}}
+
 
 +
If maintenance mode is preventing you from registering a new account, you can [[Maintenance_mode#How_to_Set_Maintenance_Mode_without_Logging_into_the_Forum | disable it in ''Settings.php'']].
 +
 
 +
===Resetting the Password of an Admin User===
 +
 
 +
Follow these instructions:
 +
 
 +
# Use phpMyAdmin (or similar) to locate (within the "_members" table) the member whose password is to be reset.
 +
# In the database field entitled "passwd", enter a new password using plain text.
 +
# Clear out (erase) any existing content in the database field entitled "password_salt".
  
===Reseting an admin users password===
+
The next time the member logs in (using the new password), SMF will automatically re-encrypt the user's credentials.
Use phpMyAdmin (or similar) to locate (within the "_members" table) the member whose password is to be reset.
 
In the database field entitled "passwd", enter a new password using plain text.
 
Then, clear out (erase) any existing content in the database field entitled "password_salt".
 
The next time the member logs in (using the new password), SMF will automatically re-encrypt his credentials.
 
  
 
[[Category:FAQ]]
 
[[Category:FAQ]]

Revision as of 07:48, 21 April 2015

If you accidentally delete your administrator account, you will need to register again and run the appropriate query for your SMF version in phpMyAdmin.

If you lose your administrator membergroup and privileges because of a mistake or conversion, you will need to run the appropriate query for your SMF version. Fortunately, in this case, you do not have to register your account again.

Script for SMF 2.0: administrate.php

The administrate.php script for SMF 2.0 has been created to solve this problem. This script is not officially supported, so use it at your own discretion. Make sure you back up your database before you begin.

To begin:

  1. Log in to the forum.
  2. Upload the file, administrate.php, to your forum directory (where SSI.php is found).
  3. Using your browser, visit administrate.php.

Other Approaches

Setting up a New User Account to be Admin

The queries below will add you back as an administrator on an SMF forum. Do not forget to replace smf_ with your database prefix. These queries can be run from within phpMyAdmin, or, if you do not have phpMyAdmin installed, from a simple single-purpose script.

For SMF 1.1, run this query:

UPDATE smf_members SET ID_GROUP = '1' WHERE memberName = 'adminsusername'

For SMF 2.0, run this query:

UPDATE smf_members SET id_group = '1' WHERE member_name = 'adminsusername'

In addition, SMF 2.0 allows you to re-attribute posts: Administration Center > Forum Maintenance > Reattribute User Posts. You just need to fill in the form using the e-mail address or username of the old user account, and the username for the member who is to have those posts. This only works for guest posts (remaining posts from deleted members are considered guest posts).

Creating a Single-Purpose Script

Follow these instructions:

  1. Create a PHP file called createadmin.php.
  2. Copy and paste within this file the code below, according to your SMF version.
  3. Replace adminusername with the login name you want to set as admin.
  4. Using FTP upload 'createadmin.php to your forum directory, which is the same directory that has SSI.php in it.
  5. Run the script, accessing it from your browser by URL as
    http://www.yourwebsite.tld/forum/createadmin.php.
  6. Afterwards, make sure to delete createadmin.php from your forum's directory.

For SMF 1.1:

<?php

// Pick a username to be the new admin user -- use the login name, not the display name
$yourusername='adminusername';

//---------------------------------------------------------------------------

// You should not need to change anything past this point in the script.
//Here we include SSI for globals used within the sql statement
include_once('SSI.php');
global $db_prefix;

//  Now run the query.
$querystring='UPDATE ' . $db_prefix . 'members
SET ID_GROUP = \'1\' WHERE memberName = \'' . $yourusername . '\'';
$adminsquirt = db_query($querystring, __FILE__,  __LINE__);

echo $yourusername . ' should now be an admin';
?>

For SMF 2.0:

<?php

// Pick a username to be the new admin user -- use the login name, not the display name
$yourusername = 'adminusername';

//---------------------------------------------------------------------------

// You should not need to change anything past this point in the script.
// Here we include SSI for globals used within the sql statement
include_once('SSI.php');

// Now run the query to elevate the user to administrator
// Also make sure that the account is activated!
$smcFunc['db_query']('', '
	UPDATE {db_prefix}members
	SET id_group = {int:admingrp},
		is_activated = {int:is_activated}
	WHERE member_name = {string:name}',
	array(
		'admingrp' => 1,
		'is_activated' => 1,
		'name' => $yourusername,
	)
);

echo $yourusername . ' should now be an admin';
?>

I Need Admin to Activate the New Account before I Can Log in

Solution: turn off account activation altogether. In phpMyAdmin, or in a single-purpose script, run the appropriate query for your version of SMF. Afterwards, be sure to set account activation back the way you want it.

For SMF 1.1:

UPDATE smf_members SET is_activated = 1 WHERE memberName = 'yourusername';

For SMF 2.0:

The SSI PHP script above will automatically activate the account, but if you prefer to use phpMyAdmin directly then the following query will activate the user:

UPDATE smf_members SET is_activated = 1 WHERE member_name = 'yourusername';

I Forgot My Password and I Cannot Create a New Account

In phpMyAdmin, or in a single-purpose script, run this query:

UPDATE {$db_prefix}_settings SET value = 0 WHERE variable = 'registration_method';

Afterwards, be sure to set the registration method the way you want it.

I Need to Create a New Account for Admin, but My Forum is in Maintenance Mode

If maintenance mode is preventing you from registering a new account, you can disable it in Settings.php.

Resetting the Password of an Admin User

Follow these instructions:

  1. Use phpMyAdmin (or similar) to locate (within the "_members" table) the member whose password is to be reset.
  2. In the database field entitled "passwd", enter a new password using plain text.
  3. Clear out (erase) any existing content in the database field entitled "password_salt".

The next time the member logs in (using the new password), SMF will automatically re-encrypt the user's credentials.